Select Page

GLS Certification

“QMS”

ISO 9001: Quality Management Systems 

Aircraft maintenance engineer Course

 “QMS” Quality Management System ISO 9001 is the internationally recognized standard for ‘Quality Management Systems (QMS)’. It is the most widely used  standard in the world, with over 1.1 million certificates issued to organizations in 178 countries 

ISO 9001 provides a framework and set of principles that ensure a common-sense approach to the management of your organization to consistently satisfy customers and other stakeholders. In simple terms, ISO 9001 certification provides the basis for effective processes and effective people to deliver an effective product or service time after time in.

“QMS”

ISO 14001: ENVIRONMENTAL MANAGEMENT

 

“ISO 14001”  is the international standard for environmental management systems (EMS) and the most widely used EMS in the world, with over 360,000 ISO 14001 certificates issued globally.

“ISO 14001” is the principal management system standard which specifies the requirements for the formulation and maintenance of an EMS. This helps to control your environmental aspects, reduce impacts and ensure legal compliance. Studies show that as much as 70% of total office waste is recyclable; however, only 7.5% reaches the recycling facility.

ISO 14001 is accompanied  by ISO 14004 Environmental Management Systems – General Guidelines on principles, systems and support techniques. The standard covers issues such as the establishment, implementation, maintenance and improvement of an EMS “QMS” certification with good services.

Nearly any business can benefit from achieving QMS certification to ISO 14001 standards. The certification is broad enough to offer significant benefits to organizations in any industry or sector, while still providing a specific framework for implementing relevant sustainable practices of QMS

GLS “QMS” India Certification Standard in India | “QMS” – “ISO …

Aircraft maintenance engineer Course

ISO 50001: ENERGY MANAGEMENT

“QMS”

 

‘ISO 50001:2018’ Quality Management System “QMS” is the newly revised international standard for Energy Management providing the most robust framework for optimising energy efficiency in public and private sector organizations.

ISO 50001 certification demonstrates an organization’s commitment to continual improvement in energy management, allowing them to lead by example within their respective industries and ensure related legislative and regulatory requirements are met “Quality Management System” (QMS).

It will also provide organizations with a standard that ensures requirements are met for compliance with the Energy Saving Opportunities Scheme (ESOS) UK legislation of Quality Management System 

Aircraft maintenance engineer Course

ISO 45001: Health and Safety Management

Aircraft maintenance engineer Course

“ISO 5011:2018” is one of the International Standards for Occupational Health and Safety in “QMS” “Quality Management system”

ISO 45001:2018 is applicable to any organization that wishes to establish, implement and maintain an OH&S management system to improve occupational health and safety, eliminate hazards and minimize OH&S risks (including system deficiencies), take advantage of OH&S opportunities, and address OH&S management system non conformities associated with its Quality Management System  activities.

ISO 45001:2018 Quality Management System (QMS) helps an organization to achieve the intended outcomes of its OH&S management system. Consistent with the organization’s OH&S policy, the intended outcomes of an OH&S management system include “Quality Management System” (QMS):

  1. a) Continual improvement of OH&S performance QMS;
  2. b) Fulfilment of legal requirements and other requirements;
  3. c) Achievement of OH&S objectives.

ISO 45001:2018 “Quality Management System” (QMS) is applicable to any organization regardless of its size, type and activities. It is applicable to the organization’s control, taking into account factors such as the context in which the organization operates and the needs and expectations of its workers and other interested parties.

ISO 45001:2018 ‘QMS” does not state specific criteria for OH&S performance, nor is it prescriptive about the design of an OH&S management system.

ISO 45001:2018 enables an organization QMS, through its OH&S management system, to integrate other aspects of health and safety, such as worker wellness/wellbeing.

ISO 45001:2018 does not address issues such as product safety, property damage or environmental impacts, beyond the risks to workers and other relevant interested parties.

ISO 45001:2018 can be used in whole or in part to systematically improve occupational health and safety management. However, claims of conformity to this document are not acceptable unless all its requirements are incorporated into an organization’s OH&S management system Quality Management System (QMS) and fulfilled without exclusion.

ISO 22301: BUSINESS CONTINUITY MANAGEMENT

Aircraft maintenance engineer Course

In the “QMS” event of an emergency, many businesses and organizations must have the ability to mitigate damage and continue operating of QMS ISO 22301 is the international standard for Business Continuity Management (BCM) “Quality Management System” “QMS” . Published by the International Organization for Standardization, “ISO 22301” is designed to help organizations prevent, prepare for, respond to and recover from unexpected and disruptive incidents. To do so, the ISO standard provides a practical framework for setting up and managing an effective business continuity management system QMS. ISO 22301 aims to safeguard an organization from a wide range of potential threats and disruptions QMS.

This standard may be right for your organization if you need to demonstrate to stakeholders that your organization can rapidly overcome operational disruption to provide continued and effective service of “QMS”.

Around the world, many countries have legislation in place to define the emergency planning responsibilities of organizations QMS. Those responsibilities often include the implementation of Business Continuity Management QMS. As a result, ISO 22301 certification should be considered essential to any organization legally required to engage in contingency planning, including utilities, transport, health and essential public services. Whether you need to implement the standard to remain in compliance with industry regulations or not, pursuing ISO 22301 certification of QMS can help your organization develop resiliency and improve risk management “QMS”.

AS9100 / AS9110 / AS9120 / AS6081 / AS9110C : 

AEROSPACE MANAGEMENT

What is the AS series of standards “QMS”?

The AS series of standards are the quality management systems QMS standard applicable to companies that supply to the aviation, space and defense industries. These standards incorporate all of ISO 9001 but include additional industry requirements specific to the aerospace industry.

AS9110 is the standard for repair stations and is based on AS9100 but adds specific requirements that are critical for the maintenance of commercial, private, and military aircrafts in “QMS” Quality management system.

This standard is intended for use by organizations whose primary business is providing maintenance or continuing airworthiness management services “QMS” for civil or military aviation articles and products and by original equipment manufacturers with maintenance, repair, and overhaul operations that are operated autonomously, or that are substantially different from their production operations of “QMS” Quality Management System. “QMS”

Aircraft maintenance engineer Course

ISO 27001: INFORMATION SECURITY MANAGEMENT

Aircraft maintenance engineer Course

ISO 27001:2013 is the international standard that provides a framework for Information Security Management Systems (ISMS) to provide continued confidentiality, integrity and availability of information as well as legal compliance ‘QMS’. ISO 27001 certification is essential for protecting your most vital assets like employee and client information, brand image and other private information ‘QMS’. The ISO standard includes a process-based approach to initiating, implementing, operating and maintaining your ISMS.

ISO 27001 implementation is an ideal response to customer and legal requirements such as the GDPR and potential security threats including: cyber crime, personal data breaches, vandalism / terrorism, fire / damage, misuse, theft and viral attacks in QMS. 

ISO 27701: GDPR COMPLIANCE

ISO/IEC 27701:2019 is a data privacy extension to ISO 27001 ‘Quality Management System’ (‘QMS’). This newly published information security standard provides guidance for organizations looking to put in place systems to support compliance with GDPR and other data privacy requirements. ISO 27701 ‘QMS’, also abbreviated as PIMS (Privacy Information Management System) QMS outlines a framework for Personally Identifiable Information (PII) Controllers and PII Processors to manage data privacy. Privacy information management systems are sometimes referred to as personal information management systems QMS.

This reduces risk to the privacy rights of individuals and to the organisation by enhancing an existing Information Security Management System in the Quality Management System (QMS).

This standard is a great way of demonstrating to customers, external stakeholders and internal stakeholders that effective systems are in place to support compliance to GDPR and other related privacy legislation of QMS.

Organizations looking to get certified to ISO 27701 in order to comply with GDPR will either need to have an existing ISO 27001 certification or implement ISO 27001 and ISO 27701 together as a single implementation audit. ISO 27701 is a natural expansion to the requirements and guidance set out in ISO 27001 QMS. “QMS”.

Aircraft maintenance engineer Course

ISO 22000: FOOD SAFETY MANAGEMENT

Aircraft maintenance engineer Course

ISO 22000:2018 QMS is the newly revised International Food Safety standard, designed to harmonize on a global scale the requirements for food safety management for businesses within the food chain in QMS Quality Management System .

ISO 22000 combines and supplements the core elements of ISO 9001 and HACCP to provide an effective framework for the development, implementation, monitorization and continual improvement of a documented Food Safety Management System (FSMS) within the context of the organization’s overall business risks QMS Quality Management System.

ISO 22000 certification is intended for organizations seeking to establish a more focussed, coherent and integrated FSMS than is normally required by law of QMS. The standard requires meeting any applicable food safety related statutory and regulatory criteria into its food safety system of QMS Quality Management System. “QMS”

FSSC 22000: FOOD SAFETY MANAGEMENT

Food Safety System Certification (FSSC) 22000 is an internationally accepted certification scheme based on a combination of ISO 22000 QMS sector specific PRP and FSSC additional requirements. FSSC 22000 has been developed in QMS respond to customer demands for a recognizable standard against which a food safety management system can be audited and certified QMS Quality Management System. 

FSSC 22000 QMS was given Global Recognition by the GFSI (Global Food Safety Initiative), QMS as well as other food safety schemes such as BRC or IFS. QMS is the certification scheme is owned by the Foundation for Food Safety Certification QMS. 

Aircraft maintenance engineer Course

HACCP: FOOD SAFETY MANAGEMENT

Aircraft maintenance engineer Course

ISO 22000:2018 is the newly revised International Food Safety standard of QMS, designed to harmonize on a global scale the requirements for food safety management for businesses within the food chain QMS.

ISO 22000 combines and supplements the core elements of ISO 9001 and HACCP to provide an effective framework for the development, implementation, monitorization and continual improvement of a documented Food Safety Management System (FSMS) within the context of the organization’s overall business risks in the Quality Management System QMS. 

ISO 22000 QMS certification is intended for organizations seeking to establish a more focussed, coherent and integrated FSMS than is normally required by law. The standard requires meeting any applicable food safety related statutory and regulatory criteria into its food safety system QMS.

 

ISO 20000-1: IT SERVICE MANAGEMENT

Designed to help organizations deliver effective managed IT services to customers and maintain those standards overtime from the help of QMS Quality Management System. ISO/IEC 20000 helps organizations efficiently deliver quality IT Service Management through a comprehensive process approach for QMS.

ITSMS implementation of QMS is designed to be a bedrock upon which to build continually improving service management systems. It is fully scalable to organizations large and small or to customers internal and external QMS. Consider the benefits of developing an ITSMS as part of your organization’s customer satisfaction and business continuity strategies in the QMS .

Aircraft maintenance engineer Course

ESD S20.20: QUALITY MANAGEMENT

Aircraft maintenance engineer Course

Electrostatic Discharge (ESD) is the common occurrence of a momentary electrical shock given off by a person or virtually any ‘charged’ object in the Quality Management System QMS.

ANSI/ESD S20.20 is the multi-industry standard for the development of ESD control programs that protect today’s increasingly sensitive electronic components, assemblies, and equipment from costly ESD damage and reduce down-time QMS. Using the standard’s control methods and guidance, an organization can develop an ESD control program that protects devices down to 100v (class 1a) or less QMS.

Used by numerous international OEMs and serving as the replacement for MIL-STD 1686, the S20.20 standard has quickly become highly regarded in the commercial electronic, telecommunication, aerospace, automotive, and medical device industries. In fact, the telecommunications industry standard TL 9000 references the S20.20 standard as a best practice for meeting ESD control needs of QMS Quality Management system.

An ESD control program helps eliminate costly component failures while increasing customer satisfaction. NQA’s ESDA-accredited Facility Certification program offers organizations a way to ensure that their programs meet the requirements and provides evidence of compliance for customer and marketing purposes

 

ISO 13485: Medical Devices Management

ISO 13485:2016 the International Quality Management Systems for Medical Devices QMS Quality Management System.

ISO 13485:2016 specifies requirements for a quality management system where an organization QMS needs to demonstrate its ability to provide medical devices and related services that consistently meet customer and applicable regulatory requirements. Such organizations can be involved in one or more stages of the life-cycle, including design and development, production, storage and distribution, installation, or servicing of a medical device and design and development or provision of associated activities (e.g. technical support) QMS. ISO 13485:2016 can also be used by suppliers or external parties that provide product, including quality management system-related services to such organizations.

Requirements of ISO 13485:2016 QMS Quality Management System are applicable to organizations regardless of their size and regardless of their type except where explicitly stated. Wherever requirements are specified as applying to medical devices, the requirements apply equally to associated services as supplied by the organization QMS. “QMS”

Aircraft maintenance engineer Course

ESD S20.20: QUALITY MANAGEMENT

“QMS”

Aircraft maintenance engineer Course

The Cybersecurity Maturity Model Certification (CMMC) in QMS is the latest verification method put in place by the Department of Defense (DoD). This certification is the QMS Department’s first attempt to set clear requirements for contractors when it comes to cybersecurity. The ultimate goal of the CMMC is to implement an appropriate level of cybersecurity across the supply chain of the QMS defense industrial base (DIB). The DIB supply chain includes more than 300,000 companies QMS, all of which are responsible for protecting unclassified information (CUI) under the CMMC QMS.

The US DoD recognizes QMS that information security is a foundational requirement for the Defense Industrial Base (DIB) supply chain. As such, the US DoD is committed to developing and requiring a consolidated Cybersecurity standard to identify required security practices and controls through the DoD Acquisition process beginning in late 2020 QMS.

CMMC will define 5 levels of cybersecurity readiness, which all US DoD contracts will invoke on the DIB supply chain. It is estimated that over 300,000 DIB contractors will be affected throughout the 3 to 5 year roll-out, with most requiring a Level 1 through Level 3 certification QMS.

 

OHSAS 18001: Health and Safety Management

“QMS” OHSAS 18001:2007

is one of the International Standards for Occupational Health and Safety.

OHSAS 18001 specifies requirements for an OH&S management system to enable an organization to develop and implement a policy and objectives, which take into account legal requirements and information about OH&S risks.

 

OHSAS 18001 is intended to provide organizations with the elements of an effective OH&S management system that can be integrated with other management requirements and help organizations achieve OH&S and economic objectives.

OH&S management is improved with OHSAS 18001 by incorporating: “QMS”

Greater emphasis on setting the objectives, monitoring performance and metrics QMS;

Clearer expectations on management; and

More careful planning for and preparing the resources needed for ensuring occupational health and safety

OHSAS 18001 applies to all types and sizes of organizations that wish to QMS:

Establish an OH&S management system to eliminate or minimize risks to personnel and other interested parties who could be exposed to OH&S hazards associated with its activities QMS;

Implement, maintain and continually improve an OH&S management system QMS ;

Assure itself of its conformity with its stated OH&S policy;

Demonstrate conformity with this OHSAS Standard by:

Making a self-determination and self-declaration,

Seeking confirmation of its conformance by parties having an interest in the organization, such as customers,

Seeking confirmation of its self-declaration by a party external to the organization, and

Seeking certification/registration of its OH&S management system by an external organization.

OHSAS 18001 has been drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. This means OHSAS 18001 is totally aligned with all other management system QMS standards developed by ISO.

How to ensure occupational health and safety?

Organizations should comply with the following requirements included in the main clauses of this International Standard ISO to help ensure health and safety within the work environment  ISO .

 

 

 

 

Aircraft maintenance engineer Course

ISO 41001: FACILITIES MANAGEMENT Systems (FMS)

“QMS”.

Aircraft maintenance engineer Course

ISO 41001: 2018  QMS was released in 2018 and is the first international FMS to be published by ISO. It provides a framework in line with the Annex SL structure to help organizations cultivate, implement and maintain an effective global facilities management system QMS . It is designed to help procurement and facilities teams by providing a benchmark to measure the competency and efficiencies of facilities management systems including the consistency and capability of the services used in QMS Quality Management System.

A facility management system QMS is designed to help organizations integrate people, locations, processes and procedures in order to drive the improvement of stakeholders quality of life whilst keeping in mind company objectives of achieving continual business improvement of best  QMS Quality Management System.

ISO 44001: Collaborative Relationships

ISO 44001:2017 is the International Standard for Collaborative Working. ISO 44001 is a roadmap for IOS establishing and managing collaborative relationships with suppliers (upstream), customers (downstream), partners (horizontal) and inter department or function (internal) in order to generate benefits for all parties.

ISO 44001 (superseding BS 11000) is about driving organisational mind set and culture toward collaboration QMS, rather than being a document focused on delivering contractual obligations of QMS .

ISO 44001 involves a structured approach to sharing resources, experience and skills supported by a method for creating, delivering and exiting relationships. Certification to this standard demonstrates that your business relationships are truly collaborative QMS Quality Management System.

Aircraft maintenance engineer Course

GMP: FOOD SAFETY MANAGEMENT

Aircraft maintenance engineer Course

GMP (Good Manufacturing Practices) establishes the operational conditions and requirements necessary to ensure hygiene throughout the food chain and for the production thereof QMS Quality Management System.

GMP consists of guidelines that define management and handling actions QMS, with the purpose of ensuring favorable conditions for the production of safe food. They are also useful for the design and operation of establishments and for the development of processes and products related to food  in QMS.

Bangalore

Bangalore
Kasturi Plaza
3rd Floor, # 3M-409, 3rd Main Road,
Outer Ring Road, NGEF Layout,
Kasturi Nagar, Bengaluru – 560043

Contact No:

+91-98863-58900

Email:

info@goldenlightsolutions.com

Bangalore

4th Cross Rd, HAL 3rd Stage
Kodihalli, Bengaluru,
Karnataka 560008

Courses

VLSI
IT, Embedded & Software
×
Register for GLV VLSI Universe Drop a Query Become our Trainer